Techno Power Electricals & Engineers
  • Home
  • About
    • Who We Are
    • Client Stories
  • Products
    • NPFC Panel
    • APFC Panel
    • RTPFC Panel
    • AHF Panel
    • PCC Panel
    • MCC Panel
    • Voltage Stabilizer
  • Services
    • Design and Install
    • Billing Analysis
    • Post-installation audit
    • Panel Spares and Care
  • Project
    • Oil Mills
  • Blog
  • Contact
  • More
    • Home
    • About
      • Who We Are
      • Client Stories
    • Products
      • NPFC Panel
      • APFC Panel
      • RTPFC Panel
      • AHF Panel
      • PCC Panel
      • MCC Panel
      • Voltage Stabilizer
    • Services
      • Design and Install
      • Billing Analysis
      • Post-installation audit
      • Panel Spares and Care
    • Project
      • Oil Mills
    • Blog
    • Contact
Techno Power Electricals & Engineers
  • Home
  • About
    • Who We Are
    • Client Stories
  • Products
    • NPFC Panel
    • APFC Panel
    • RTPFC Panel
    • AHF Panel
    • PCC Panel
    • MCC Panel
    • Voltage Stabilizer
  • Services
    • Design and Install
    • Billing Analysis
    • Post-installation audit
    • Panel Spares and Care
  • Project
    • Oil Mills
  • Blog
  • Contact

OIL MILLS PROJECT

We are involved in Oil Mills Projects. We manufacture Auto Transformer Starters for Oil Expeller.

Auto Transformer for Oil Expeller. "THE AUTO-STARTERS"


AUTO-STARTER is a fully automatic low starting current starter, which has the following advantages over & above.

The other starters: 

  1. The "Auto-Starter' does not carry any handle. To start your Squirrel cage induction motor, just one push button is required to be pressed; that is all.
  2. The greatest advantage of the "Auto-Starter IS that it draws less starting current from the MAINS and delivers simultaneously more current to the motor for the proper operation & quicker acceleration of a Squirrel cage motor.
  3. The "Auto-Starter" motor starter can limit the starting current of a squirrel-cage induction motor to any desired value, depending upon the rules & regulations of the individual supply authorities.
  4. The life of the contacts of the "Auto-Starter* Contractors type starter) is much more as it incorporates only automatic contractors.
  5. The "Auto-Starter" can be switched ON/OFF by any nos. of remote control stations.
  6. The main advantage of the Auto-Starter is that, because of its low starting current, one can adjust the overload relay too close to the normal load of the motor & as such it will trip off itself whenever there is overloading/ single-phasing, etc.
  7. In our "Auto-Starter", we use Siemens/ L&T/ Schneider/ C-H/ Jyoti make Contactors, overload relay, Time delay relay, etc.
  8. Auto-Starter is guaranteed for two years against any Technical defect / bad workmanship

SALIENT FEATURES

  1. Easy operation
  2. Time tested 
  3. Complying with the requirements specified as per IEC: 947, IS: 3914 & IS: 8544 (Part 4)
  4. Comprehensive range
  5. Maintenance of motor starters is very easy. Everything is front operated.
  6. Wall Mounting Design up to 75 HP & Floor Mounting Design 80 HP & above.

Enquire now

© 2025 Techno Power Electricals & Engineers. All Rights Reserved.

Powered by

This website uses cookies.

We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.

DeclineAccept